Whenever we talk about exhaust service, most people normally think about exhaust pipes and mufflers. Well, actually, exhaust service is a lot more comprehensive these days. For example, catalytic converters were mandated in 1976 and on-board emission control computers in 1990. Governmental emissions requirements have forced manufacturers to come up with much more sophisticated ways to comply with environmental regulations.
Exhaust service has really become exhaust and emissions service. High-tech computer controlled emissions devices are now a big part of exhaust service. Because it is so sophisticated, your vehicle manufacturer recommends you have your emission system checked out by a qualified Oakville exhaust technician regularly to make sure everything is working right – usually every 6 months or 10,000 miles/16,000 kilometers.
If your Check Engine light comes on, especially if it’s flashing, get your car looked at right away. Technicians at Eastside Auto Service Limited handle emission problems everyday. You might have exhaust or emissions trouble if your car is difficult to start, runs rough, is noisy or smoking. Call Eastside Auto Service Limited at 905-844-9641 to schedule an appointment if you experience these problems.
Let’s review the exhaust system. We will start from the top and start with the exhaust manifold. That is the part that attaches to the engine and collects the exhaust from the cylinders and directs it into the exhaust pipe. Exhaust gaskets help seal the connection with the manifold and various other joints along the way. If the manifold is cracked or loose, or a gasket is leaking, dangerous gases could escape into the passenger compartment, where you ride. Carbon monoxide can be deadly, so it is important that your exhaust system doesn’t leak. The exhaust pipes connect the various components. They can rust or be damaged by a rock, so they need to be inspected periodically.
Next is the catalytic converter. This part looks like a muffler. It changes chemicals that are dangerous to your health and the environment into harmless carbon dioxide and water. It doesn’t require any maintenance itself. But eventually they wear out. You will find this out when your car fails an emissions inspection.
Now the muffler. Its main job is to quiet engine noises. Mufflers work by either absorbing or baffling sound. And you can actually customize your car’s sound with different mufflers – anything from whisper quiet to bad-boy rumbley. Rusted or road-damaged mufflers can leak and need to be replaced right away.
The exhaust system is attached to the car by a series of hangers and clamps. These fasteners hold the system in place. When hangers come loose or break, hot exhaust components can touch and melt wires, hoses and lines.
Finally, we end at the tailpipe. This is the final outlet for the exhaust. These can be plain-Jane or pretty flashy. Also, the oxygen sensors monitor the oxygen content of the exhaust so the engine control computer can adjust the fuel-to-air mix to keep the car running right.
Exhaust and emissions service covers plain old pipes and high-tech computers. It impacts everything from life and death safety due to exhaust leaks, to fine-tuning the sound of your ride.
Here at AutoNetTV, we have viewers, like you, from all across the country who write to us with questions or feedback. One common question we’re asked is: What is a differential and what does it do? You may have been told your differential needs service, or seen it as an option up on the service menu. Differential service covers a lot of things, so let’s first talk about what a differential does.
As you drive through a turn, your outside wheels and inside wheels turn at different speeds. Kind of like the cars going around a race track – the ones driving in the outside lanes have a greater distance to travel than the cars in the inside lanes. The differential is what allows the outside and inside drive wheels to rotate at slightly different speeds so that the tires don’t hop or skip while taking corners, or lose traction in dirt or snow. Differentials have gears in them that transfer the power from the drive train to your wheels – which is why they’re often referred to as gear boxes. The gears need to be very strong to do this work, and they need to be properly protected so that they’ll last.
All vehicles have some form of differential. If you have a front-wheel drive car, your differential is often called a transaxle and is located in the front. If you have rear-wheel drive, the differential is in the back of the car. If you have a four-wheel drive vehicle, you will have a differential in the front and the back – and in the middle as well. The center differential adjusts for differences in speed between the front and rear wheels.
Differential fluid lubricates and cools the gears. Over time, the fluid can get dirty from bits of the gears grinding off. The additives that keep the fluid clean and protect the differential break down over time. So your vehicle manufacturer has scheduled intervals for you to have your differential fluid changed.
Differentials are hard working mechanisms, and, along with the gears in a manual transmission, need to be serviced regularly with high-quality, replacement fluid. Your Mississauga automotive service advisor can give you more information as to when your next differential service is recommended. You can also ask if they have a record of when the service was last completed.
As with most service intervals, if you are driving under more severe conditions, you will want to service your differential more frequently. “Severe service” conditions are defined in most owners’ manuals, and include: frequent starts and stops, short trips, cold weather, hot weather and towing. All these conditions add to the stress of the vehicle and its parts. Also, off-roading in Ontario can be especially hard on differentials, especially if you cross streams. Proper service will extend the life of your gears and keep them running more smoothly. If you have never had your differential checked, visit http://eastsideautoservice.autotipsblog.com/contact-us for more information.
Hey Oakville, Ontario Do you hear loud noises under the hood when you turn on your air conditioner? Do you only get cool air sporadically? If so, it is time to get your air conditioner checked. It’s real easy to take your car’s air conditioner for granted. Just push the right buttons and out comes cool, dry, clean air. But your air conditioning system needs attention from time to time to help it keep its cool.
When most people in Oakville hear the words “air conditioning problems”, it sends a shiver up their spine. That is because the air conditioning system is fairly complex. It has a lot of parts and when it’s broken, it’s expensive to repair.
What things can we do to prevent air conditioning breakdowns?
A common cause of air conditioning failure is leaks. Water and air can leak into the system. The system doesn’t work as well with air in it. And water can cause rust that leads to damage of the A/C components. Also, refrigerant, the stuff that makes the air cold, can leak out, reducing the efficiency of the system, making it work harder to cool the air. Periodically evacuating the air conditioning system and recharging it keeps the proper amount of clean refrigerant in the system so it cools better and lasts longer.
You should also run the air conditioner regularly, even in a frosty Oakville winter, so that it lubricates itself and keeps the seals from drying out, which leads to leaks. Your owner’s manual will have recommendations for how often to service your air conditioner. Of course, if it’s not working right, now is the time to get it checked. Eastside Auto Service Limited can inspect and test your air conditioning and offer evacuation and recharge services. This goes a long way to avoiding having to bring your air conditioner in for major repairs.
New environmental laws have stopped the manufacture of Freon, a refrigerant that was common in cars made before 1993. There is a very limited supply of Freon so the price is very steep. It may not be worth its weight in gold, but it probably is worth its weight in silver. If you have an older vehicle that uses Freon, you may want to consider having it retrofitted to use the new R134-A refrigerant. It will pay for itself in the long run. So, if your AC is just a lot of hot air, bring it in to Eastside Auto Service Limited for an inspection.
So you’ve bought a used car in the Oakville area. How do you know what you’re getting? It is hard to know what you’re getting because people in the Oakville area sell cars for different reasons. Think about why you’ve sold cars. Did you just want something new or were there problems that you wanted to run away from. Maybe it was a little of both.
Used cars with 25,000 to 35,000 miles on them are often lease returns, corporate program cars or vehicles that have done duty in rental fleets. We feel pretty confident because they’re newer and may still be under warranty. But how well have they been maintained?
If you plan on owning a car for a long time, you’ll keep up on the maintenance so that you can avoid expensive repairs down the road. But, if you know you’re only going to have the car for two or three years, you may not be so committed to maintenance. It would be easy to think that skipping an oil change here and there wouldn’t ruin a brand new engine. Then it’ll be someone else’s problem when it comes time to pay for the damage.
It would be very tempting to skip the 30,000 mile service if you knew you’d be turning in your leased vehicle in a couple of months.
If the vehicle didn’t come with maintenance records, you need to assume the worst. Most likely the coolant system and transmission have never been serviced. The cabin air filter has probably not been changed and a fuel system cleaning may be in order.
And if your “new” used vehicle has more miles on it, an inspection is even more important. Check your owner’s manual or talk with your service advisor at Eastside Auto Service Limited (call 905-844-9641) about what should have been done. Please don’t forget the timing belt; that can be very expensive if it fails.
Eastside Auto Service Limited will help you with a plan to take care of critical services and get the rest caught up. If your budget won’t allow you to take care of everything right away, we can help you prioritize your needs and get it taken care of over the next several months. And remember to keep your maintenance records. They’ll help you get top dollar when it’s time for you to sell.
A lot of our viewers have asked whether or not they should use their severe service maintenance schedule, which is listed in their car owners’ manual. It can be confusing. Let’s clear the air on this subject. Cricket Killingsworth is from QMI/Heartland, a manufacturer of automotive products and fluids. She’s been in the automotive business for 20 years and is a speaker, a trainer, and a writer. Cricket says there’s so much confusion on this topic because, “Most owners’ manuals actually have two maintenance schedules. Sometimes these are called ‘regular service’ and ‘severe service’. Sometimes they’re simply called Schedule 1 and Schedule 2. A severe service schedule recommends that things like an oil change, air filter replacement, and transmission service be done more often: either in fewer miles or in less time.
Manufacturers create these specific schedules for each vehicle they make. So there isn’t one generic schedule that applies to all cars. In addition to your owners’ manual, Oakville automotive repair centers subscribe to information services that provide the maintenance schedules for every vehicle – so they can help you know when to take care of needed services. Below is a typical definition for severe service.
Most trips are less than four miles
Most trips are less than ten miles and outside temperatures are below freezing
You drive in very hot weather
The engine is at low speed most of the time (not on the highway)
Stop and go driving
You operate your vehicle in dusty or muddy conditions
You tow a trailer, regularly carry heavy loads or carry a car-top carrier
It’s common sense: Just a few minutes at freeway speeds allows the moisture in the oil to evaporate. Very short trips, or trips of less than ten miles when it’s very cold, don’t allow the engine to heat up enough to get rid of the water. And water in the oil leads to damaging sludge. Also, towing and heavy loads raise operating temperatures and cause fluids to breakdown more quickly. Dusty and muddy driving means that more dirt will get past the air filter to contaminate the fuel system and engine oil.
The bottom line is that you need to decide for yourself if the regular or severe service schedule is right for you, based on your driving. Look at your owners’ manual, or talk with your Eastside Auto Service Limited service advisor who can help you know which schedule to follow. Eastside Auto Service Limited is located at 573 Chartwell Road, Oakville Ontario.,
Here is what a fleet manager said recently: “Since city miles are generally tougher on vehicles than highway miles, we use the manufacturer’s severe service schedule as the basis for our preventative maintenance program. We massage those schedules over time, increasing or decreasing the service intervals so that they make the most sense. There is a little bit of art to go along with the science.
Make an honest evaluation of your driving habits. Unless you do mostly Ontario highway driving in moderate weather, you’ll likely have a fairly good amount of severe service mixed in. Some people just want to play it safe and follow the severe service recommendations, rather than analyzing how they drive each month.
Richard Petty once told AutoNetTV, “You’ve gotta have good brakes. If you’ve got good brakes you can keep yourself out of a lotta trouble.”
That’s why a regular brake inspection is on every Oakville car’s maintenance schedule. An inspection at Eastside Auto Service Limited will check your brake system and let you know if there are any problems.
Of course, if you’re having trouble with your brakes, get your car into Eastside Auto Service Limited right away. Here are some symptoms to watch for:
Low or spongy brake pedal
Hard brake pedal
A brake warning light that stays on
Constantly squealing or grinding brakes
Vibrations or clunking sounds when you apply your brakes
If you are experiencing any of these, it’s time to get your brakes checked.
There are two types of brakes: disc and drum. Disc brakes have a rotor that’s attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle.
Drum brakes are more common on back wheels. Both types have pads or shoes that press against the brakes and slow the vehicle. Brake pads and shoes are made out of very tough material to withstand the heat and force generated when stopping your car. Eventually, they wear out with use, and become too thin and need to be replaced.
If the brake pads wear away completely, you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced. That’s not only expensive, but also dangerous because your vehicle won’t stop as quickly. Sometimes rotors warp or crack and must be replaced.
Brake service will also include a check of your brake fluid. When the brakes are applied, the pressure in the fluid actives the brake pads or shoes. Not enough fluid means not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and brake damage, and with hard use, the brakes could severely fade or even fail. You should change the brake fluid when your manufacturer recommends to avoid these problems.
There are different grades of brake pads; good, better and best. Higher grades cost more, but give better braking performance and smoother operation. It’s OK to upgrade your brake pads. But, never use a grade that’s lower than what the manufacturer recommends.
So, be sure to properly maintain your brakes, because it’s a lot cheaper than paying the body shop after an accident.
Come in to Eastside Auto Service Limited for an brake inspection before damage occurs. You can call ahead for an appointment by calling 905-844-9641.
The energy from exploding fuel is what powers your engine. But some of the vapors from the explosions escape into the lower part of the engine, called the crankcase. The crankcase is where your engine oil hangs out. These gases are about 70% unburned fuel. If the gases were allowed to stay in the crankcase, they would quickly contaminate the oil and turn it to sludge. Sludge is one of the biggest enemies of your engine, clogging it up, eventually leading to expensive failures. Also, the pressure build up would cause seals and gaskets to blow out. Therefore, these gases need to be vented out.
Gasoline engines used to simply have a hose that let the poisonous fumes vent out into the air. In 1963, the federal government required gas engines to have a special one-way valve installed to help reduce dangerous emissions. Diesel engines are not required to have these valves.
The positive crankcase ventilation, or PCV, valve routes crankcase gases through a hose and back into the air intake system where they are re-burned in the engine. Fresh, clean air is brought into the crankcase through a breather tube. It’s really a pretty simple system, but does an important job. The re-circulating air removes moisture and combustion waste from the crankcase, preventing sludge. This extends not only the life of your oil, but the engine as well. The PCV relieves pressure in the crankcase, preventing oil leaks.
Eventually, the PCV valve can get gummed up. Then it can not move enough air through the engine to keep it working efficiently. If the PCV valve is sticking enough, you could have oil leaks, excess oil consumption and a fouled intake system. If you experience hesitation or surging or an oil leak, it may be a sign of PCV value problems. Your owners’ manual may give a recommendation for when the PCV valve should be replaced – usually between 20,000 mi/32,000 km and 50,000 mi/80,000 km. Unfortunately, some manufacturers don’t list a recommendation in the manual, so it can be easy to overlook.
Many PCV system problems can be diagnosed with a visual inspection. Fortunately, PCV valve replacement is both quick and inexpensive. Proper oil changes will greatly extend the life of the PCV valve. Skipping a few recommended oil changes can allow varnish and gum to build up in the valve, reducing its efficiency. So now when your Oakville service technician tells you its time to replace your PCV valve, you will know what he’s talking about. If you have had your car for a while and this is the first you’ve ever heard of a PCV value, ask your tech to check yours out or call Eastside Auto Service Limited at 905-844-9641.
When you hear the word ‘suspension‘, you may think back to those energetic days of grade school. Well, your car’s suspension is actually a good thing because it keeps your car up off the road and helps provide a comfy ride. It needs to keep your wheels firmly planted over bumps and through curves. Your suspension system has many parts. If you look under your car, it’s basically everything that connects your wheels to the car’s frame. These are heavy duty parts that do a lot of work. They need to be inspected for damage and excessive wear at least once a year. A good time for this is when you get your annual alignment service.
Here are some warning signs that your suspension may have problems:
the car pulls to one side;
it wanders;
the steering is erratic;
you see uneven tire wear;
you experience a poor ride or handling;
you see oil leaking from shocks
. . . You just don’t feel in control when you’re driving.
Some suspension parts just wear out with use. Shocks and struts eventually lose their ability to control your ride. Wheel bearings need to be repacked every couple of years. And some suspension pieces need to be lubricated when you get your oil changed. Your service advisor at Eastside Auto Service Limited can oversee an inspection and tell you what problems you may have.
If you’re in an accident, your suspension can be damaged or knocked out of alignment. Even a minor accident, like hitting a curb around Oakville or even a large rock can mess things up. With a minor accident it’s tempting to just get an alignment or wheel balance to correct the problem. But if there’s some damage, a simple alignment won’t actually fix the problem, and you’ll just have to align it again after the repairs are made. So if you have an accident, get your suspension system inspected right away. Suspension problems should be fixed immediately because they can lead to unsafe handling.
One big cause of suspension damage is potholes – those nasty magnets that seem to draw our tires right into them. Well, Here are some tips for avoiding damage from potholes: First, keep your tires at their full air pressure. That gives tires their maximum resiliency and will hopefully keep your wheels or other suspension parts from crunching on a big hole. Next, just pay attention. When you see a hole you can’t miss, slow down before you hit it. Driving at a slower speed will limit the damage, and may keep your drink from spilling. But don’t brake directly over the pothole. That will cause the car’s weight to shift forward and add to the potential damage.
Eastside Auto Service Limited Give us a call today at 905-844-9641. Or stop by at 573 Chartwell Road, Oakville, Ontario L6J 4A8
The last new car sold with a carburetor in North America rolled out of the dealership in 1990. Since then, all new vehicles have had fuel injectors. In very simple terms, a fuel injector is a valve that squirts fuel into your engine. Your engine control computer tells the fuel injector how much gas to deliver as well as the precise time it should be delivered. Of course this happens thousands of times a minute. Fuel injection is a much more precise way of delivering fuel than carburetors. That translates into better fuel economy and power. Virtually all fuel injectors for gas engines are known as port fuel injectors because they deliver the fuel to a port just outside the cylinder. Port fuel injectors operate at about 40 to 80 pounds per square inch of pressure.
A few auto makers have introduced gas direct injection systems on some engines recently. These systems inject the gas directly into the cylinders under very high pressure – hundreds of times the pressure of port injection systems. Although more complicated, direct injection technology promises greater power with improved fuel economy, so we can expect to see more of it in the future.
As you can see, the level of precision required of your fuel injectors is very high. They need to be operating properly in order for your car to run right.
High temperatures under your hood and variations in gas quality cause fuel injectors to become fouled with wax, dirt, and carbon. Injectors can become partially clogged, preventing them from delivering the proper amount of fuel at the correct pressure. The design of each engine requires a specific spray pattern from the fuel injector that might be altered when the injector is dirty. When injectors are dirty, the fuel doesn’t burn as efficiently resulting in poor fuel economy and loss of power. So it is important to keep your fuel injectors clean.
Skilled service technicians at Eastside Auto Service Limited in Oakville can perform a fuel system service for you. (Visit http://eastsideautoservice.autotipsblog.com/contact-us.) That is a fuel system service – not just fuel injector cleaning. That is because the fuel has a lot of ways to become dirty or contaminated between the gas tank and the fuel injector. A fuel system service starts with a fuel filter replacement. This filter cleans the gas as it leaves the tank. The various parts of the fuel intake system need to be cleaned from time to time to remove harmful gum, deposits and varnish. Finally, the fuel injectors are cleaned so that they operate properly and deliver the right amount of fuel at the right time.
Your Milton area service center uses a process for cleaning your fuel system that includes state-of-the-art cleaning chemicals as well as some old fashioned scrubbing. Proper maintenance of your fuel system means that you will spend less on gas, enjoy strong performance and prevent costly repairs down the road.
We would like to give you an update on some of the things happening in automotive fluids. You know, cars are becoming more sophisticated everyday – and fluids such as, oil, coolant and transmission fluid are becoming more specialized at about the same pace.
The do-it-yourselfer has to be pretty careful so that they do not actually harm their vehicle with the wrong type of fluid. That is why so many Ontario car owners rely on the advice of their service consultant to not only get the correct family of fluids, but to suggest the formulation that is best for their car and the way they drive.
Let’s start with engine oil. If you have been paying attention, you will have noticed a number of new oil weights on the scene in the last several years. Modern engines are built to much tighter tolerances and have very complicated valve trains. The oil must be thin enough to lubricate complicated parts when the engine is cold. The weight of an oil is expressed in terms like 20-W-50 or 5-W-30. Manufacturers recommend the weight of oil for each vehicle they make. The recommendation is based on engine design. Your Oakville service center will know what weight your manufacturer recommends – and it’s important to follow those recommendations. A service adviser at Eastside Auto Service Limited can also offer suggestions for special formulations and can explain conventional and synthetic oils.
Antifreeze, or engine coolant, is another area that has become more complicated. For a long time, manufacturers only called for a couple of different types of coolant. Now there are several different formulations that are needed because of the different materials that manufacturers are using to build the cooling system. Using the wrong type of coolant can actually void your warranty, so you want to get that right.
Transmission fluid is beginning to be specialized as well. New transmission designs have particular requirements that mandate the use of specific formulations. Recently, new, somewhat confusing, standards for brake fluid have also been released.
Not too long ago, there was a good chance that all of the vehicles at your house would use many of the same fluids. However, as automotive technology advances, the array of basic automotive fluids you need will grow. And, some of the formulations will cost a little more. Fortunately, your Mississauga service center will continue to update their training to keep pace with technology so that you’ll get the right fluids your car needs. It’s all part of the commitment your service center makes to your driving peace of mind.
